Showing posts with label nikon cameras digital cameras digital slr. Show all posts
Showing posts with label nikon cameras digital cameras digital slr. Show all posts

SanDisk 8GB/30MB Ultra CF Card ( SDCFH-008G-A11, US

SanDisk 8GB/30MB Ultra CF Card
Customer Ratings: 4.5 stars
List Price: $49.99
Sale Price: $24.99
Today's Bonus: 50% Off
Buy Now

I am very fond of my Sandisk cards.

I also have a Sandisk 4.0 GB Extreme card, and did an interesting comparison. I held a recording time race between Ultra and Extreme, here in my livingroom. Recording a big buffer full of photos in multiple trials, the recording times were identical. The more expensive Extreme was no faster than this card. In my case, the recording rate has to be limited by my camera, a Nikon 8800.

Having a reliable card as large as 8.0 GB is very helpful.

My cards have traveled to Alaska, Mexico, and Ecuador, and have had to function in all sorts of conditions. They have recorded 100,000+ photos, each of which I desperately did not want to loose. I back them up as often as I can, but I still worry, and I have lost photos when other cards failed.

I am pleased to say I have never lost a photo from a Sandisk card in spite of the abuse I put them through.

Last week I filled up my Sandisk Ultra II 8.0 GB with important photos carefully staged photos of butterfly specimens at the California Academy of Sciences. I worked 12 hours a day for 8 days on this project. The card behaved as it always has, and every single one of the 2400 photos I took, made it home safely.

Do back your cards up often, but from experience I can say that I have a very, very favorable impression of this card.

Click Here For Most Helpful Customer Reviews >>

LAVA UHF/VHF Outdoor HDTV Antenna with Motor Rotor HD-2805

LAVA UHF/VHF Outdoor HDTV Antenna with Motor Rotor HD-2805
Customer Ratings: 4 stars
Buy Now
This antenna has great performance at a cheap price. It also is much smaller than most other antenna's out there. I think it does very well, pulling in anything in the 50 mile range. I have not been able to pull in anything over that, but our topography in NW alabama doesn't help that. I am impressed with performance, but the antenna rotor is low tech, hard to make fine adjustments so It is hard on fringe stations to get a good signal.

Performance is excellent, the actual antenna rotation device is sub par and could use an upgrade, I would pay $20 or $30 more for a more high tech rotor device.

Click Here For Most Helpful Customer Reviews >>

InFocus X2 Multimedia DLP Projector

InFocus X2 Multimedia DLP Projector
Customer Ratings: 4 stars
Buy Now
Bottom line best major purchase I have made since I bought a home with a finished basement!

I got the projector and mounted it on the ceiling in my basement projecting on a light-brown wall. I expected that I would need to paint the walls white, or get a screen, but was shocked by the amazing picture quality. Here are the details:

1) Comcast Cable with HiDef Box. Hidef program is so amazing it makes me want to cry. Sports programing blows the mind away. I even enjoy watching boring hi-def shows with the wife, like the Oscars, just because I am so amazed at how crystal clear the picture looks. You feel like you are there! Regular TV looks surprisingly great too, but setting it up right is critical. Make sure to change the aspect ratio back to Native (vs 16:9 when watching hi-def channels). Ensure that the HDTV cable box has the following settings:

Aspect Ratio (controls regular programming) = 4:3 letterbox

Output Type (controls High def programming) = experiment with 720P vs 1080i

4:3 overide (controls regular programming)= 480p.

I am also using the expensive $99 monster DVI cable to connect to the cable box. This is essential to make regular TV look great vs grainy. Get the DVI to M1 connections, wires and adaptors you MUST budget this into your overall budget or the projecter will not be a great buy (see my "problem" section below).

2) X-Box. I purchased the Hi-Def cable/wire from Microsoft for $20. Once you buy the cables, you can go into the Xbox dashboard settings to allow for 720p and 1080i. Most games are in 480p and 16:9 format. The few Games in highdef look fantastic! You can check hdtvarcade.com to see the exact resolution of every game.

3) DVD player: Since the Xbox only outputs in 480i, I wanted to try the upconversion DVD players. I first tried the Denon 1910. That did NOT work when using a DVI cable!!! It might have been because it was refurbished or possibly it was because the Infocus X2 is not HDCP compliant?? I'm not sure, but the 1910 warns against non-HDCP compliant units and InFocus says that x2 is non-compliant so that's my best guess. Next I tried the TOSHIBA SD-5970. That worked, and I hooked it up using the $99 Monster HDMI to DVI cable. I'm not sure if it was worth it, because DVD's look great, but NOT Amazing compared to HiDef Comcast programming. The verdict is still out, but I have never seen any of the DVD's like Finding Nemo that supposedly look MUCH better with progressive scan DVD's. I can't tell much difference between when DVD is set to 720p vs 1080i HDMI output.

Once again, everybody that comes over, including the sceptic wife, is shocked by our basement they all say its like a full-scale theater, much bigger and clearer than a regular big screen TV and I don't even have surround sound yet that'll be my next big purchase. Infocus X2 is highly recommended, but be sure to check out the problem section below:

Problems

1) My InFocus X2 does not have any component inputs. That means to get premium quality, you must come through the M1/DVI input. If you have a DVD, Cable box and Xbox like me, it is a real pain to switch the cable in the back (especially with a ceiling mount). I got myself a step ladder to make it easier. The DVI switcher for 4 DVI cables is TOO expensive, almost $400.

2) Be prepared to spend at least $3-400 after you get your InFocus to purchase DVI cables for the cable box, possibly HDMI cables if you buy a progressive scan DVD player, as well as adapters to connect your DVI cable to the M1 computer port... Its definitely worth it, but just be prepared. In my opinion, the progressive DVD player is optional (saves you approx $150), but the cables are mandatory.

3) No way to turn off unit with remote (and yes it is still a little noisy in whisper mode, but once the movie starts you can't hear it anymore). I have it set-up so that after it cools/powers down I just turn off the entire unit on the wall switch since it is ceiling mounted.

Click Here For Most Helpful Customer Reviews >>

Wacom Cintiq 12WX 12-Inch Pen Display

Wacom Cintiq 12WX 12-Inch Pen Display
Customer Ratings: 4.5 stars
List Price: $1,199.00
Sale Price: $1,049.00
Today's Bonus: 13% Off
Buy Now

At first glance, it's an amazing product. It's a great size, it's thin, bright, with nice buttons and a nice pen.

I just got mine and am using it to work with as a normal tablet (to control the cursor on my main screen), and also to work directly on and draw/paint.

I use a 21" Cintiq at work and also have a 6x8 Intuos 3 tablet that I used before getting this new 12" Cintiq.

The 12" Cintiq has a lot of flaws so much so that I think I may have to return it, which is really disappointing.

First. Though it's a "12-inch" screen, I'd say it's more like a 10". Why? Because when you move the cursor to the edges of the screen a little over an inch away from each border, the cursor starts to shake tremendously. This simply doesn't fly when you're trying to keep a steady hand and get a good line while drawing or painting. It's also very annoying when you're just trying to click on something in the menu bar at the top of the screen. The cursor looks like it's spazzing out and it's really hard to live with.

I think part of the reason for this may be because of the limited 2-point calibration, as someone else who reviewed on here talked about. The calibration is just nowhere near refined enough.

Like I said, I also have a 21" Cintiq and I don't have this problem with that. They just didn't do a good job with the 12".

Second. The excessive cables. They really need to figure out how to slim this down and simply it and I think they could. Before you buy look at the manual online and see all that you have to do to get this thing working. If you're thinking about taking it with you on the go with your laptop, forget it. There's so much to have to deal with. I don't see why they can't just make a simple cable like Apple's Cinema displays it plugs into the DVI port, a usb port for the pen to work, and then a power brick, which then plugs into the wall. That'd be so much simpler. The cintiq itself is very thin so it lends itself to portability, but when you have to consider all the extra cables and connections you have to make, it doesn't work out so well.

Third. The quality of the screen. It is cheap. When I first plugged it in I wasn't disappointed I saw my desktop background on this small 12" screen and it looked nice and bright. But then I started working with it. When you're actually drawing in Photoshop the line doesn't look nearly as crisp as on my Apple Cinema display. Text also suffers. Just reading through web pages it's quite noticeable. I think another review said that they just used a cheap laptop screen, and after working with it for a couple days, I think that person was right.

There are nice things about it. The design is nice and like I said before, it's nice and thin so it sits nicely on my desk (a problem I have with the bigger ones is that they are SO bulky).

It's easy to pick up and put in your lap. And the stand is nice too.

I really wish that it didn't have the problems that it does because I'd love it to work well.

My main problem has to be the cursor jumping around and shaking it's really awful and I don't think I can stand it. It's worst at the edges of the screen, but you can't even click and drag to scroll down a web page without the cursor shaking. It's not only annoying, it's almost unusable. I'm used to using my Intous 3 and my goodness what a difference. That one is SO much better at tracking your pin movement.

Worth $1000? Not at all. Hopefully they'll come out with a better updated one sometime soon then it may be worth the price.

Click Here For Most Helpful Customer Reviews >>

Epson WorkForce B11B194011 Pro GT-S50 Document Scanner

Epson WorkForce B11B194011 Pro GT-S50 Document Scanner
Customer Ratings: 4 stars
List Price: $399.99
Sale Price: $285.00
Today's Bonus: 29% Off
Buy Now

Customer review from the Amazon Vine Program For the last year and a half, I've been using a Fujitsu S510 SnapScan page scanner, which is a natural competitor to the Epson GT-S50. So, when I was offered the chance to review the Epson, it seemed like a natural fit somebody looking to purchase one is likely to also look at the other. (Go to Fujitsu ScanSnap S510 Sheet-fed Scanner to read that review. It was fairly far down, on page 4, when I last looked.)

Let's look at the two scanners...

First of all, both scanners are top fed and scan both sides of a page in a single pass. They are infinitely faster than the scanners built into the "all-in one" printers and suitable for high volume scanning...the Epson is rated for 1200 pages per day.

The Epson GT-S50 comes with both TWAIN and ISIS drivers, giving it with a clear advantage in interfacing with software from other companies. Almost every program that can read from a scanner uses one or the other. The ScanSnap, on the other hand, uses its own proprietary driver, which only ties into their ScanSnap Organizer program...a program that displays small images of the scanned pages. Both scanners come with OCR programs, for converting scanned images to editable text, but, with the TWAIN driver, only the Epson directly interfaces with different programs OmniPage Pro, Textbridge, or whatever else you prefer.

The Epson driver offers more choices in output resolution. Whereas the SnapScan has four levels Normal (150dpi), Better (200dpi), Best (300dpi) and Excellent (600dpi) the Epson has eight levels ranging from 75 dpi up through 600 dpi. For some strange reason, neither company's software allows you to name the output file before scanning. After scanning, you'll need to manually rename each file with something recognizable. (The default date/time stamp doesn't give you any useful information if you need to find a file a month later).

The Epson ships with software for both Macintosh and Windows systems. I've tested both versions in a mixed Windows/Mac network and they both work smoothly. The Fujitsu ScanSnap, on the other hand, comes in dedicated Mac (S510m)and Windows (S510) models. I've only used the Windows version.

Both scanners are similar in their physical shape, although the Epson looks quite a bit larger...it's about 1" longer, 2" taller and an inch or two deeper than the SnapScan. It holds 75 pages in the input slot, versus 50 in the SnapScan. The Epson has a two-line display on the front. The SnapScan only has "scan" and "power" buttons. Both units are solidly built and give the feeling that they'll last for a long time...I've used my SnapScan for 30K+ pages and it's still going strong. Both units have user replaceable pads and rollers to keep them running smoothly.

How do they operate in real life? To begin my testing, I fed the same 42 page document through each scanner. The document was complex as they come, with both text and color graphics on most pages. It was also laid out to be used in a vertical flip chart (letter-size, but bound on the short edge)...from the scanner's perspective, the back-side of each page was upside down. My theory was that a scanner that could make sense out of it could handle almost anything...

The Epson scanned my test document faster than the ScanSnap, but software processing of the scanned image took longer. The ScanSnap took 3min 10sec from the start of the scan to PDF file creation, without using text recognition; the Epson took 4min 6sec. The OCR software runs in the background on the SnapScan, but runs in the foreground on the Epson. Because of this, the SnapScan can be used to scan the next document while the text is being recognized, while the Epson remains busy until it's completely finished. My test document tied up the Epson for 12min 20sec from the time that I started the scan until the OCR finished and saved the file. My computer's no slouch, but a faster computer would obviously shorten that time. If you use an outside text recognition package, you can always run it at a later time and eliminate this time waster.

The ScanSnap features automatic rotation of upside down and landscape pages. (Everything is fed in vertically on both scanners.) The Epson doesn't...you get what you feed in. In my test document, the ScanSnap flipped the upside pages right-side up. The Epson left them upside down. Even with the upside down pages, the OCR worked fine.

The Epson can handle mixed page sizes in one scan. You can drop all your receipts in and have them scanned at once. The ScanSnap needs all the pages to be the same size in each scan...a longer page is assumed to be a misfeed and aborts the scan.

The Epson has a straight through paper path. It can handle credit card and ID Card scanning. The ScanSnap doesn't and can't. This makes the Epson perfect for a medical office where health insurance cards are always being copied.

The Epson can scan documents up to 36" long. The ScanSnap stops at legal size (14"). This is useful when you are scanning cash register receipts, but as a practical matter, I seldom run into anything else that's longer than 14"...at least not without also getting too wide for the scanner.

Using the default settings, the ScanSnap had a sharper output at 600dpi. Clicking the "unsharpen" box in the Epson software produced a scan that almost exactly matched the ScanSnap's output...why unsharpen actually sharpens is a mystery. In solid-color blocks, the Epson was clearly superior, producing a solid-color output. The ScanSnap had a lot of off-color noise that was clearly visible when enlarged.

The Epson also has the ability to drop out colors, which is useful when scanning something printed on colored paper. It would also be useful if you need to remove a red "confidential" or "top secret" stamp from a borrowed document. :)

Besides the drivers and other utility software, the Epson includes PaperPort 11 SE, which is a visual file organizer. It operates similarly to the ScanSnap Organizer. I didn't test it out...the last time I installed PaperPort 11 Pro (NOT the SE version), it messed up my computer so badly that I ended up reinstalling Windows to get rid of it. (If you have a minute to kill, go read the reviews on Amazon for PaperPort 11 Pro!) I assume that Epson's version is more reliable, but having been burned more than once, I'm not about to try any version of PaperPort ever again! Both scanners use the ABBYY FineReader software. It works nicely. The ScanSnap also includes a full version of Adobe Acrobat Standard...a $200 program if you were to go out and buy it separately.

So....which scanner would I buy? The short answer is that it depends on your application. If you're using both Macs and Windows machines, the choice is clear...the Epson works with both. Both scanners are built for years of use and each has unique features (e.g. card scanning) that point it in one direction or the other. The Fujitsu ScanSnap is designed to be a more "push the button and it goes" type of device. The Epson GT-S50 is more flexible. I like them both.

Update August 3, 2009 I've now had both machines running side-by-side for about five months. I now find myself almost always using the Epson instead of the ScanSnap. The reason is simple the Epson NEVER double feeds. This may be a function of the newness of the Epson, but my Fujitsu isn't really that old, nor, at 19K pages has it seen much service. The double feeding has become a real problem...I have to carefully watch everything going through the SnapScan to make sure that it's not skipping a page. Not good.

Update #2 November 14, 2009 I upgraded one of my office computers to Windows 7 and the GT-S50 is working fine. There no drivers yet available for the ScanSnap S510...Fujitsu is estimating the end of December. Even their newer model, the S1500 won't have drivers for another couple of weeks.

I also need to add that I've have a less-than-satisfactory with Epson service. My GT-S50 keeps truckin' along, but another Epson scanner, a V500 Office started misfeeding after two weeks. Epson wouldn't ship me a replacement unit...their scanner service policy apparently requires that the scanner be delivered, at customer's expense, to a repair depot. That's not exactly the most customer-centric way of doing things...

Update #3 January 27, 2010 Fujitsu now has Windows 7 drivers available on their website. My s510 is now up and running.

Click Here For Most Helpful Customer Reviews >>

Canon EF 100mm f/2.8L IS USM 1-to-1 Macro Lens for Canon Digital

Canon EF 100mm f/2.8L IS USM 1-to-1 Macro Lens for Canon Digital SLR Cameras w/ 67mm Multicoated UV Protective Filter, Deluxe Bag, Lens Cap Keeper, Microfiber Cleaning Cloth, Memory Card Wallet, USB 2.0 Card Reader, Professional Tripod
Customer Ratings: 4.5 stars
Buy Now
I only really needed the UV filter and the Tripod as one of my backups has a broken clip. The Lens itself is now my most used Prime I have.

Lenses:

new Canon 100mm f/2.8L IS USM

Canon 50mm f1.8

new Sigma 50mm f1.4 (Lens is over rated IMHO) Loud lens and focus is spotty

4 other zoom lenses (3 are L glass)

The IQ is the best it can get and I have been looking at photos try to decide if it is just because I want it to be better (no it is just better)

I have less out of focus images and I have the best dynamic range it seems also. (yes it is situational but it really looks good)

I have not had the lens long and I was debating on the 135mm f2L for many months before I decide I wanted to do some Macro work so this became the easy choice. I don't think I went wrong with that choice as the extra stop does not bother me too much.

My thoughts on IS are for hand holding quick photos which seems to be what I have been doing lately. The IS does seem to help with lower Shutter speeds as advertised for me. Like I said before I have very very few throwaways with this lens.

Matched with the 5D mark III it seems to perfect. My 7D also has no issues but the ISO noise seems to be much greater on the 7D at even ISO 400-800. I don't know if it is the lens on the crop frame or something with the 7D and this lens. Other lenses EF-S 17-55mm is perfect on the 7D without the same noise issue. (strange) Don't be discouraged by this if you have a 7D as I have not tested it much (one shoot) and it could have just been something with the 7D settings.

For what I need it for it won't be going on the crop frame much anyway.

Long story short this is my sharpest lens and I have some lenses that I love. When wide open or stopped down this thing just performs. I can't see softness even at f2.8 anywhere with many different shutter speeds. I will be doing some macro work soon and will update the review as I'm just learning Macro which seems to be much different then my normal event and portrait photography.

Click Here For Most Helpful Customer Reviews >>

Ricoh GXR Mount A12 12 MP Digital SLR Camera

Ricoh GXR Mount A12 12 MP Digital SLR Camera
Customer Ratings: 4.5 stars
List Price: $649.00
Sale Price: $619.99
Today's Bonus: 4% Off
Buy Now

This unique photographic equipment, the Rioch GXR Mount A12 12 MP Digital SLR camera (the "GXR Mount A12") presents a reviewer some difficulty to share his user experience in a concise and interesting user review.

As a new owner of this product, I have a few points for the intended user of the GXR Mount A12 review :

1 NOT A STANDALONE PRODUCT

This is a system product it is part of a system and requires the Ricoh GXR body module to and a compatible M-mount interchangeable lens to work ;

2 DESIGNED TO WORK WITH LEICA M-MOUNT LENSES & M-MOUNT COMPATIBLE LENSES

It is a lens-sensor mount, it is part of a camera body built & designed to work with Leica "M" mount interchangeable lenses available since 1954. Today it works with most Leica-M, Zeiss ("ZM"), Cosina Voigtlander (CV) M-mount and where compatible certain LTM or Leica Thread Mount (LTM)lenses with the appropriate M-mount adaptors. Because of the millions of M-mount lenses out there, The GXR Mount A12 comes with a mount testing kit to test the mount compatibility of your lens before you mount the lens ;

3 AN M-MOUNT ADAPTOR WITH A 12.6Mp APS-C SENSOR.

In old "analog film terms", this would be both "the lens mount" and the "film" but of course things are much simpler to classify this as a "Digial SLR Camera body" because of the electronic components but it is NOT a standalone camera body product unlike the Leica M8/M9 because it the body is complete only with another system part, the Ricoh GXR Body module.

4 ONBOARD 1.5X SENSOR CROP MEANS IT IS A DEFAULT 1.5x TELECONVERTER.

The smaller than 35mm film format sensor of the 12 Mega Pixel APS-C sensor of the GXR Mount A12 has a 1.5x crop to the image taken with M-mount lenses, for example the Leica M-Summicron 50mm F2 would become a 75mm F2 M-Summicron lens, the 35mm F2 M-Summicron becomes a 52.5mm F2 M-Summicron,and the 90mm F2 M-Summicron becomes a 135mm F2 M-Summicron, In a nutshell, the usual 35mm,50mm and 90mm set-up becomes 50mm,75mm and 135mm! Add in an affordable (non Leica) lens like the 15mm f4.5 Voigtlander Superwide Heliar and you have a gang of four of 22.5mm, 50mm, 75mm and 135mm on your GXR! ;

5 RETAINS THE PERFORMANCE & CHARACTERISTICS OF THE LEGACY M-LENSES

The GXR mount does not interface electronically with M-Mount Leica lenses with electronic contacts. Since it is made as an adaptor to retain much of performance and characteristics of "analog film era" M-mount lenses, The GXR Mount A12 is quite minimalistic in terms of enhancement to lens, but the good news is, it still retains the old favour of your most favourite M-lenses, including those you received as an gift from your grandparents.

6 RELATIVE EXPENSIVE BUT COST EFFECTIVE NICHE PRODUCT

Although this is a relatively expensive product, its cost could be measured against relatively more expense product like the Leica M8, Leica M9 and the 2x crop micro-fourthirds (with expensive adaptors) product currently available.If you been saving up for an M8 or M9, this may be the "next" best choice available to date. Key advantage over the micro-fourthirds (MFT) Olympus Pen or Panasonic GF-series is the bigger 1.5x crop APS-C sensor.

7 REPLACES HIGH COST OF CONSUMABLES THE FILM

Replacing the hefty cost of consumable like film means that user is more encouraged to experiment and play with the M-lenses they already owned and to get the most out of the relatively expensive but extremely well built M-mount lenses. Though some would agrue that M-lenses were made for film, my comments are based on sound economics and does not imply that it would replace the quality of photographs made with film.

8 TWO MANUAL FOCUSING WITH FOCUS ASSIST MODES

Recommended for photographer who loves to manually focus their lenses only. The mount does not convert the lenses to Auto focus but it comes with 2 focus assist modes in case focusing with the 3 inch LCD screen of the GXR body module proves to be a challenge and requires some practice.

9 EXCELLENT IMAGE QUALITY AND PRICE-PERFORMANCE

This largely depends on the interchangeable lenses used, however, we are talking about the top-end class of lenses to "mate" with a optimal and high performance digital sensor. In the hands of a seasoned photographer, the technical specs, image quality, optical performance would meet the price of this GXR. Furthermore, the added cost of modifying M-lenses with electronic contacts is avoided, leaving the mechanical solid old lenses as they are.

FIVE STAR PRODUCT

As a owner of two Ricoh GXR cameras with the S10 and A10 interchangeable modules, and half a dozen old Leica M mount lens collection ; I had purchased this product on its release to the retail store without reading any review, a bold move if the product turns out to be a lemon-given the hefty price-tag.

Alas, the GXR Mount A12 has met and exceeded my expectations as a niche solution and a very compact and a GXR system built on high performance gear set-up. Thank you for reading this user review.

Click Here For Most Helpful Customer Reviews >>

Logitech HD Webcam C270, 720p Widescreen Video Calling

Logitech HD Webcam C270, 720p Widescreen Video Calling and Recording
Customer Ratings: 4.5 stars
List Price: $39.99
Sale Price: $29.75
Today's Bonus: 26% Off
Buy Now

I had suspicions the quality would be poor and grainy, but I was very pleased once I got it plugged in and running.

The quality is very good, and it has all kinds of neat features. You can set it to detect and record motion with or without the green light on for up to fifteen minutes. It has a follow face option which will track your motion to ensure the other person sees you even if you get up and move around, which can be set on and off. Right light ensures great quality even in darker rooms. My only complaint is that the adjustable tabs to keep it atop the screen are a little goofy. I struggle to keep it on top of my laptop screen sometimes, but that issue seems to common with all web cams.

I suggest it to anyone looking for a great web cam at a good price.

Click Here For Most Helpful Customer Reviews >>

Pioneer SPH-DA100 AppRadio Car Stereo with iPhone 4 App Control

Pioneer SPH-DA100 AppRadio Car Stereo with iPhone 4 App Control and 7.0' Capacitive Touch
Customer Ratings: 3.5 stars
List Price: $600.00
Sale Price: $429.95
Today's Bonus: 28% Off
Buy Now

hello everybody,

I'd like to thank you for taking few minutes of your time to read this review. I hope you find it helpful :)

First of all, my review if from an enthusiast point of view and might be a little bit technical but my intention is to give you all guidelines before you buy. To know what to expect when you're expecting (the appradio of course ;)). BTW, I'm a mac user so here are some very few tips to make your life easier and save lot of time guessing.

Items used on this installation:

Pioneer SPH-DA100 AppRadio Car Stereo with iPhone 4 App Control and 7.0" Capacitive Touch

The software running on the appradio is version 8.17 (the latest)

Pioneer CDAH200C Appradio Adapter Kit For Android

Metra 70-1771 1989-2005 Ford/lincoln/nissan Cd Player Into Car Wire Harness

Factory unlocked iPhone 4s, Appradio applications, standard IoS 6.x software.

Factory unlocked Samsung Galaxy S3 (i9300) using rooted Jelly Bean, ARliberator, Tasker, Carhome Ultra, Triangle Away software.

Samsung EPL-FU10BEBSTA HDTV Adapter TIP (5 to 11 Pin Converter) Retail Packaging Black

What is in the box:

Appradio 2 headunit

Wiring harness

GPS Antenna which is magnetic and it includes an auto adhesive metallic plate which can be placed on the top of your dashboard to make the installation a breeze.

USB/iPhone cable. this is an 2 in 1 cable, not two cables which is very clever.

At a glance:

Screen quality: 5 stars

Look and feel: 5 stars

Overall quality: 5 stars

Handsfree quality: 100 stars (sorry amazon, i know your scale is 5 but... this thing is that good)

Appmode: 4 stars

Easy to use appmode: 4 stars

Warnings: 2 stars

Now the loooong story :)

Appradio 2 update process:

The reason i named the iPhone cable an USB/iPhone cable is because it has two cables going out of the iPhone connector, my guess is one of them transports the audio signals and the other one is the usb control. The USB control side of the cable has a division where you can put a USB pendrive to perform the update process. Take into account, if you leave this portion of the cable hiding (i did) you're going to face some problems when trying to update.

Updating is very easy, just download the single file from the Pionner web site, uncompress it on a empty pendrive, plug it in your appradio using the described (see added photos to the product page) port and it simply asks you if you want to update, once confirmed, it begins to update beeping everytime it feels to, so don't worry about the beeps. Mac users beware, mac os adds some silly files on the pendrive so the appradio does not recognizes the file. Just copy the file using a windows computer and you're done.

So... how does it works with an iPhone 4s?

It works reasonably well, just plug it in your iPhone 30 pin connector, then touch the apps icon on your screen, let the appradio know you're not crazy enough to drive while watching Harry Potter, then let the iPhone know you allow the connection and after all the prohibitions/limitations, there you are... now you can use all your appradio ready applications with also a reasonable reliability.

If you use the music app on the appmode environment, you can use Waze or whatever appradio app you like.

I particularly like to use the PLX Devices 'PLX Kiwi 2 Wifi' Car to Smartphone Connection connector with dashcommand so you can see the real-time data on your screen... this is awesome!, another application i do like using appradio is Waze, it is very funny and while with my wife, she reports traffic jams so we can earn some points that really gives you absolutely no real benefit whatsoever but keeps you entertained while on a massive traffic jam.

One personal note about all the warning screens and handbrake signaing and the lot:

We, the consumers are reasonably smart people, at least smart enough to know if we keep watching movies while driving and hit the tree, we're going to hurt ourselves, hurt the tree and wreck the car. If we hit another car we can be liable for the damage to the other car and for the possible injuries to other people... there are laws for all of this. Don't you think a warning message everytime you try to do anything when driving while annoying, is a bit of stupid? I mean, don't play videos while on the go and that's it but all the time receiving a warning? really?

Ok, now back to the regular service... we have arrived to the android section of the review... and if you're like me, you might have a lot of questions without answers... I still do but I'll try to give you the few answers I have but first, let me tell you, this is my first Android phone and my first appradio so please forgive me if I go to thing that may appear too obvious to experienced android users.

The first problem pioneer faces with android devices is, because android unlike IOS devices comes from different makers, they do have different ways to connect basically, MHL connectors and HMDI connectors. MHL is a micro USB connector with embedded HDMI so here's the thing, If your android compatible phone uses HDMI connector, you don't really need the android kit, what you'll need is an hdmi cable with one normal HDMI connector to the back of your appradio and an micro USB power source with 1000 mah or more to keep your phone alive.

If you have a compatible MHL connector phone, you can go with the pioneer kit which includes the HDMI cable, the USB power source with the USB to Micro USB cable and a 5 pin MHL converter. This convertes receives the HDMI cable and the power and delivers everything on a single MHL cable to your phone.

The main difference between the iPhone and android standard behavior is the android phones sends control signaling like touches to the screen using Bluetooth, don't worry, you can still use BT for handsfree calling which by the way is nothing less than espectacular and maybe your OBD II BT which is a lot cheaper than the PLX Kiwi and the Torque app which is also a lot cheaper than the dashcommand app so connecting the android phone needs a little bit more interaction from the user. After connected, it works and feels just like the iPhone does.

But wait... if you have a Galaxy S3 phone, you're going to need the described 11 to 5 pin adapter which despite the fact is Samsung original, doesn't work propperly... the video starts to flick whenever it feels to, you're going to loose the connection and you're going to be VERY frustrated so you can opt for different ways to connect your phone other than the android kit Pioneer sells. I'm not going to be any more critic about the kit because, to be fair, Galaxy S3 is NOT on the Pioneer's phone compatibility matrix.

Galaxy S3 Connection option 1:

This is by very far away and beyond, the best choice and if I knew this before, I could've saved some money, you can buy a good quality not too long hdmi cable, and usb power source and Samsung EAD-T10JDEGSTA WI-FI All-Share Cast HUB Data Cable Retail Packaging Black so now you can connect your phone completely wireless using Wi-Fi and bluetooth. Just connect the all-share to the HDMI cable and to a power source and you're ready to go... it gives you the screen mirroring while bluetooth gives you the touch. Please beware I've only tested it using ARliberator, not appradio app so your mileage may vary (rooted phones please read further).

Galaxy S3 Connection option 2:

Here you can replace the MHL cable from the Pioneer kit with the Adapter HDMI EPL 3FHU for Samsung Galaxy s3 but please, do yourself a favor... do not buy a cheap alternative... buy the original because you don't want to have the flickering and the snow and the frustration... my advice, don't go cheap with this. Just plug the HDMI cable and the powered micro USB to one side, the phone to the other side and you're done.

ARLiberator:

In case you don't know, you can buy for $29 in google play store, an application named ARLiberator. What this app does is to give you total access to your phone from the appradio screen, in other words, you're going to have your phone in landscape mode in your appradio so you can use whatever app you like as long as it runs in your phone but to use ARliberator, you need to root your phone which may have some effect on your phone's warranty so please beware.

I have tested the ARLiberator and found that you can have an app named carhome ultra which gives you a car friendly home screen while adding navigational info.. give it a look if you will, then you might find the Tasker app of some use for automating the BT connection, the ARliberator run, the carhome ultra run when you plug the phone and to reverse all of that when you plug it off and must use the app Triangle away to put your flash counter to zero because all-share does not works on rooted phones.

Torque app works only under ARliberator mode because it is not an appradio ready app while Dashcommand is and unlike the IOS version, you can try it before buying using the free version.

Final thoughts:

Does it really worth the effort to go ARliberator way? Yes... it does... Only if you want to have a smart head unit instead of an iPhone/Android application head unit.

I had a Kenwood DDX419 In-Dash 2-DIN Head Unit Car Stereo which is VERY BAD... the hands free function was useless, the user interface came from a Commodore Vic 20 or a Sinclair ZX-81... So I can tell you... even without the Appmode, just for the Hands free function and the ipod capability with a 21st century interface... I would pay the premium... no doubt.. BTW, this one sounds better too :)

Don't root to cheat your cellular company... you want freedom? just pay for it.. you can always buy an unlocked version of about any phone.

Technology company... are you listening? or just attending to meetings filling out spreadsheets just to justify your mere existence? How hard can it be to understand the customers wants smart head units on their cars? Is it too difficult to build an android based head-unit that might connect to your phone for internet acces either using Wi-fi hotspot or even the bluetooth so we can save all the hassle of doing all of this? Regulations? you can put your dozen of warning screens we do have right now anyway...and limit the video playback for the dumb to not to hit the tree.. I mean... really? Marketing... wake up before Apple creates the iCar and then sue you all for being followers....

Sorry for the long read and some strong opinions but I really do hope it helps you... While I tahnk all the forums writers i've rad to understand all of this after i bought the appradio.

Regards,

JP

Click Here For Most Helpful Customer Reviews >>

ViewSonic Monitor VX2252MH 22-Inch LED-Lit LCD Monitor

ViewSonic Monitor VX2252MH 22-Inch LED-Lit LCD Monitor
Customer Ratings: 4 stars
List Price: $217.00
Sale Price: $129.99
Today's Bonus: 40% Off
Buy Now

To put this review into perspective, I purchased this monitor to replace a 6 year old HP LP2065 20" LCD monitor which is not HDCP compliant. On installing this monitor, I noted that the image was bright and lacking in contrast. Brightness and contrast are adjustable in the manual mode in the menu. Adjustments made the image better, but was still lacking in black level performance. Fine text was definitely softer than that on the HP monitor. When scrolling text, a yellow smear was visible trailing the text. This effect was mostly eliminated when switching to the "Game" mode. However, switching to this mode sets the brightness and contrast to fixed values. They are no longer manually adjustable. I had attended a wedding and took pictures with my digital camera. I processed the raw files and adjusted them the best I could based on the monitor's image. I had trouble getting them to look right. The color accuracy of this monitor is definitely sub-par. When I printed some of these pictures, they were dark and dull looking, not at all how they looked on the screen. I put back the old HP monitor and looked at the processed images. They were dark and dull on the screen, exactly how they printed. I reprocessed the raw files and now have good looking prints. At this point, I packed up the monitor for return. It cost me just under $15 to ship it back. Lesson learned. Here is a summary:

Pros

HDCP compliant

Inexpensive

Light weight

Bright image

No hot or dead pixels

Good horizontal viewing angle

Comes with a complete set of cables

Cons

No height adjustment

Mediocre black level

Poor vertical viewing angle

Inaccurate colors

Scroll smear

Very limited image adjustments

Unsuitable for photographic image processing

Soft fine text

This monitor would be suitable for non image critical applications or gaming where its fast response and bright image would be a plus. As for me, I'll be shopping for something better.

Click Here For Most Helpful Customer Reviews >>

Olympus E-PL5 16MP Compact System Camera with 3-Inch LCD, Body

Olympus E-PL5 16MP Compact System Camera with 3-Inch LCD, Body Only
Customer Ratings: 4.5 stars
List Price: $549.99
Sale Price: $549.00
Today's Bonus: $0.99 Off
Buy Now

I am a professional photographer (weddings, family portraits, commercial, modeling, graduation, etc) who recently sold every piece of my Nikon gear for the OMD EM-5. Best decision I ever made! No more back focus issues and I have never seen a camera shoot sharper. Image quality of the EM-5 has blown away my expectations. Enter the EPL-5... So far this camera has proven to be a smaller version of the EM-5. The image quality is just as stunning and the autofocus is still beyond amazing! So everyone is aware and if you are wondering if these cameras can compete with the big boys, I have shot weddings in very very dark locations and I have shot portraits in every type of landscape and condition. Professional quality in a small package that will change the way you shoot and really make you think more artistically like we did when we used film. I am an olympus fan for life and I never thought I would say this but the micro 4 3 technology has changed the way I work!

Click Here For Most Helpful Customer Reviews >>

Panasonic BL-C140A Outdoor MPEG-4 Network Camera (Silver)

Panasonic BL-C140A Outdoor MPEG-4 Network Camera
Customer Ratings: 4 stars
Buy Now
This review is going to be somewhat technical and I'll mention some other choices. I've installed more than 10 Panasonic network cameras across the product line; so how does this one compare? The whole series is rock solid reliable. As far as the practical use as an outdoor cam, the BL-C140A is a middle of the road compromise. As other reviewers have discovered, the night time image quality is not very good. The BL-C140A has a 1/4" CMOS sensor which produces a little bit better daytime image than the 1/6" CMOS on the popular BL-C111A and BL-C131A models. If you're looking for a cam to mount in an outdoor location that is protected from direct moisture (like hanging under a sheltered roof eave) then I'd recommend the Panasonic BB-HCM511A instead. The BB-HCM511A uses a CCD sensor (vs. CMOS) that produces a richer dynamic range of colors during the day, and has much better low light sensitivity. It can still show the scene under moonlight, whereas the BL-C140A would show a pitch black view. If you truly need an "outdoor" camera because it's going to be exposed to the rain, then the BB-HCM531A is an excellent outdoor model. The only difference between the BB-HCM511A and BB-HCM531A is that the BB-HCM531A comes with an extra plastic cover for the connectors in the back. Panasonic charges more than $200 for this piece of plastic, so it you're crafty you can make your own weatherproof cover for the BB-HCM511A cable connectors and save some money (hint: silicone sealant works). Note that if you don't already have a POE enabled switch, the BB-HCM series doesn't come with a POE injector so you need to order that separately. Coming back to this BL-C140A model, the other thing I didn't like is that the POE (Power Over Ethernet) is proprietary instead of using the industry 802.3af standard. So if you have a POE switch then it won't be able to use all the neat power management features. The BB-HCM series however does support the 802.3af POE standard. If your budget is just enough for this cam, the BL-C140A still a wonderful unit. If you can afford to pay just a little bit more then check out the other models I mentioned and you'll get a superior night time view. Here's another tip, if you want to have the camera view on your desktop all the time in Vista or Windows 7, go to the Microsoft Windows Live Gallery and search for Panasonic to download the CoconutView Sidebar Gadget. Then you won't even need to open the browser windows to get a peek at what the camera is seeing.

Click Here For Most Helpful Customer Reviews >>

Sigma DP1 14MP Digital Camera

Sigma DP1 14MP Digital Camera
Customer Ratings: 4.5 stars
List Price: $599.00
Sale Price: $549.99
Today's Bonus: 8% Off
Buy Now

I am a professional photographer using Nikon's D300 and D3 for portraiture and weddings. These are both super cameras that have been a boon to my business. However, like all modern SLRs they are big, heavy, noisy and the automation works for most everything. I came to photography when cameras were much simpler and actually required a knowledge of how a camera works. I am glad I did, as to use the DP1 to its full advantage you must know what you are doing.

Photography is a passion even in my off time and I wanted something light, small, and quiet for the candids of life that I would always have with me. The poor image quality, control, and responsiveness of compacts was not what I was looking for. I briefly considered the M8 but for a non-money making "fun" camera it was way too much to spend. The DP1 filled the bill for me.

Why? You will read complaints about slowness. If you are a point and shooter, that is correct, and you should avoid this camera.

However, if you are a photographer read on. During my research I read an article written by a Leica user that said he was always ready to shoot by having his camera prefocused and ready to go. That is the best way to use the DP1 also. Use manual focus and the correct aperture for your expected depth of focus needs. Unlike any other compact camera you can both turn off the lcd and the sleep mode and walk around with the camera ready to shot in an instant. Of course with the lcd off you will need the optional viewfinder.

I normally shoot in A mode and the controls allow fast changes to aperture and exposure compensation, something else no other compact camera does.

The image quality at ISO 100 is astounding and loses some quality as it goes up to ISO 800. 800 is somewhat disappointing as color saturation drops off dramatically.

Yes it is slow for point and shooters and has a lousy lcd but if that is sacrifices Sigma had to make for a superior image from a compact camera at this price point its fine with me. I am having a blast with this camera as it opens up a whole new world of image possibilities. I highly recommend it to anyone who has a photography style that suits a M8 but does not want to spend a fortune for the tool to do it with. Its not a M8 of course but a bargain in comparison.

Click Here For Most Helpful Customer Reviews >>

TomTom VIA 1505TM 5-Inch GPS Navigator with Lifetime Traffic

TomTom VIA 1505TM 5-Inch GPS Navigator with Lifetime Traffic & Maps(Discontinued by Manufacturer)
Customer Ratings: 3.5 stars
List Price: $179.95
Sale Price: $129.85
Today's Bonus: 28% Off
Buy Now

**UPDATE**

July 12, 2012

After having the Nuvi 1490LMT in my car for the longest time, I finally took it inside the house a couple of days ago and updated its map/software. In the update, they took care of the "disappearing map" glitch for this particular unit. They also updated some of the map graphics, especially the junction and lane assist views they have a more polished look (they look better IMO).

I tested the Nuvi and happy to report that the "disappearing map" glitch is indeed fixed. I did not experience a map reload during the entire 1-hour drive.

**ORIGINAL REVIEW**

Garmin Nuvi 1490LMT vs. TomTom Via 1535TM

I purchased both units to compare them and in the end pick the unit that best suits my needs and preferences. I wanted to get a new GPS unit because the built in unit I have in my SUV is outdated. The portability, being able to use on another vehicle, and the free lifetime maps are really what I'm after but decided that lifetime traffic alerts is not a bad option either. I would like to point out that whatever you chose between the two, the decision will not be a mistake as they are both good GPS units, they both have their own strengths and weaknesses, but it will come down to what you really prefer or your comfort level.

I tested both units driving around where I live and when we went on vacation in Las Vegas. I had them mounted next to each other most of the time.

TomTom Via 1535TM

PROS:

By default, provides more info (speed, distance, time etc) on the status bar, located on bottom of screen, compared to the Nuvi. And just above the Via's status bar, it shows the street name that you are currently on (I find this very helpful), the Nuvi does not have this feature while navigating. The Nuvi will give you the option to display the same info on its status bar, but it will place the status bar vertically on the right side of the display that makes the main screen smaller (like an old 3.5" GPS screen) I really really like this feature and how it's displayed on the screen, it's really cool to have all this info ready at all times. Something you might say, "Honey, I'm about 65 miles away and will be home in about 50 minutes, by 2:30pm, I should be pulling up by the driveway." All this info is displayed on the unit at all times, you don't have to calculate in your head.

Consistently finds POIs faster than the Nuvi. It's almost instant whereas the Nuvi could take seconds, sometimes even several minutes to find its first POI (this really sucks when you are so ready to go, even a minute feels like an eternity!). But this also depends on how popular the POI is, if you're looking for McDonalds or something well known, then both units will give you an instant list.

The voice command feature is great when it works and it works most of the time. I really like this feature especially when driving to a new address; it is so much easier saying where you are going instead of manually inputting everything onto the unit. It's also great for looking for a certain POI while driving, I love how you can just say "Go to the nearest Starbucks" and it will get you there with just a single button input! The voice command feature is not perfect though, as some POI names, no matter how your pronounce it, just won't get recognized by the unit. I tried IKEA and 7-ELEVEN numerous times with no success. I was driving on the freeway one time and my low fuel indicator flashed and in a city I'm not familiar with and all I have to say was "Go to the nearest gas station" and within minutes I'm filling up my gas tank! This is so cool! I didn't have to fiddle with the unit to input and chose where I needed to go, keeping my attention on the road where it should be. Even with the feature's shortcomings, I found this feature to be a deal breaker!

I also like the fact that you can still access the device while connected to the computer. This is helpful if you wanted to change settings or play around with the unit. The Nuvi locks you out the minute you plug in the USB cord.

The voice on the unit sounds a lot better than the Garmin Nuvi. The voice sounds more human, better to the ears while the Nuvi's voice sounds too robotic. The volume on the Nuvi is much louder than the Via though.

Preloaded speed traps/traffic camera POIs. The unit will beep to alert you of incoming traffic cameras! It'll make you rethink about running that red light!! The Nuvi does not have any traffic camera POIs preloaded, although you can download these from online.

CONS:

The Via takes a long time to acquire a satellite signal! It takes anywhere from 1 to 4 minutes just to get a lock on a signal! You're probably saying, what's 1-4 minutes?! Well, I had the Nuvi next to it turned on the same and it acquired a signal in less than 30 seconds! The 4 minutes of waiting feels like forever! And this is not sometimes... this is all the time!!

Like a lot of people say, the LCD screen of the TomTom Via is inferior to that of the Garmin Nuvi's. And I have to agree! The display gets easily washed up under the sun! There are times when you have to really focus on the screen just to read what is on there. It also doesn't help that the letters and graphics on the screen are smaller and the colors are not that vivid! The icons look flat as well. I was shocked when one day I was driving (almost sunset) when the sun's rays coming from the rear window hit the Via's screen and I totally couldn't see it, while the Nuvi sitting next to it was still visible!

The unit is not very responsive, very sluggish... You press an icon and it almost takes a full second to respond! There are also no beeps when you click on something, unlike the Nuvi that responds faster and gives you an audio cue every time you touch something on the screen.

Although the unit generates a POI list very fast, the list it provides shows very little info. It will only list found POIs and the distance in miles away from your location... Drilling down further will only provide a phone number and a mini map of its location. I found this very annoying as I always like to know the address of where I'm going, what city, what street it's on etc. I live in the Bay Area (California) and would always like to know the city of my destination since I would rather travel more miles than to cross one of the bridges, deal with the traffic and pay toll! I find it uncomfortable to just drive to a location xx miles away and with no other info... The Nuvi provides the full address, phone number and more info of all its POIs.

Voice Command when making calls is almost useless. If you have an iPhone, use its Voice Control feature to make calls instead it will give you better results. The Via has a hard time recognizing names, so when you say "Call (insert name here)", it'll give you a list of your contact info, and you have to scroll down to get to the person you want to call then say the number of the contact before it'll dial. And given how the unit is very unresponsive to inputs, this little call could become very annoying fast!

There is also a bug that they need to fix. After updating the maps, all your favorites get deleted! This can get frustrating if you end up doing these four times a year (number of times they issue map updates in a year). MyTomTom, their online support, is still not fully functional. The only thing that it really does is update maps; you can't download extra voices, extra POIs and other things.

Garmin Nuvi 1490LMT

PROS:

The LCD Screen on the Nuvi shows very well under the sun. The colors pop and you won't get the washed up colors you get with the Via. The display is not cluttered with unnecessary info, very easy to read with big letters, better contrast and vivid colors. This is one of the main selling points of the Garmins, they are very easy to understand and use! You glance at the screen instead of "focusing" because of how easy it is to digest. The Garmin just has a better GUI (in my opinion) compared to the Via. I find the icons on the Nuvis looking better compared to the Via's flat look. The Nuvi just displays everything better, it's "prettier" and easier to look at than the Via. The Via is like reading a book where the Nuvi is like reading a book with pictures. The presentation is just better with the Nuvi.

Detailed POIs. The Nuvi generates POIs with complete addresses, phone numbers and how far it is from your location. I really like that Garmin included the complete address instead of just the distance. It gives you a better sense of direction and the comfort of knowing where you're going. The downside is that the Nuvi takes longer than the Via when looking for POIs that are not very common. It is also very convenient when saving these POIs to your favorites as you don't have to enter/edit too much info.

Acquires satellite signals very quickly compared to the Via, which usually takes 1-4 minutes. The Nuvi usually takes less than 30 seconds to lock on a signal, a minute at the longest. The GPS start up is also very quick. The unit is also very responsive to your commands; it gives you audio cues when inputting commands. It seems that the Nuvi just does everything a tad quicker than the Via.

I actually like the fact that Nuvi will say "Recalculating" when you miss a turn. I like to know when I make a mistake, so for example, when I come back to the same place without the GPS, I'm not taking the "wrong turn" and thinking that it's the correct way... The Nuvi recalculates fairly quickly and usually gets you on the right track right away. The Via will not give you an audio cue if you miss a turn, it'll just instantly recalculate and show you the next correct turn as if you were on the correct path all along. Some people actually prefer this as they are sick of hearing "recalculating".

When you put an entry in your Favorites, the Nuvi will actually pronounce the name you give it. (BTW, the Nuvi does this for all destinations) For example, if I name my friends address as "Fat Joe's House", the Nuvi will actually say "Arriving at Fat Joe's House in .5 miles" or "You have arrived at Fat Joe's House on the right". Just imagine the possibilities... hahaha! It's surprising how many words and names the Nuvi can pronounce! The Via, on the other hand, will just give you the default message "You have arrived at your destination on the right". Some folks might not find this as a PRO but I sure am entertained by this!

CONS:

I wished that they could've added the same info on the status bar like that of the Via. On the status bar on the bottom of the screen, it only shows the estimated time of arrival on the left pane, the current speed and the speed limit on the right pane, the middle pane shows the lane assist feature when needed. The Nuvi also does not show the current street you're driving on, and if you have forgotten, the only option is for you to look out the window and look for street signs.

Looking up non-common POIs can be very frustrating! My family decided to check out the Boiling Crab, a very popular restaurant that serves mostly seafood (super yummy!). Upon entering the name, the Via showed 2 Boiling Crab locations instantly while the Nuvi was still "searching". We decided to just go and not wait for the the Nuvi. 50 minutes later, we are parking the car and the Nuvi is still "searching"! C'mon Garmin, if it's not in the POI database, then just make the unit say "not found" or something like that, instead of making us wait! The Via will show you "not found" if it didn't find the POI in its database, it won't make you wait forever!

The traffic alerts comes with its evil twin advertisement! If the TomTom Via can give you lifetime traffic alerts without ads then why can't the Garmin Nuvi? I found that the ads will pop up when at a complete stop and when your are driving on unmarked roads, like parking lots, the ads do not block too much of the screen to become a safety hazard but still annoying to some people (it doesn't bother me at all). There's an option to disable the ads but doing so will also disable the traffic alerts.

While navigating, the Nuvi's display would all of a sudden turn blank (white screen) for about half a second and it then quickly "re-draws" the map. It seems like it "reloads" the map at certain points. This reload does not affect the navigation in any way but it's just odd that it does this. I'm not sure if it's a defect on my unit... I will contact Garmin about this and will keep you guys updated. This happens at least once every time I use the GPS unit! I find this annoying as I never saw this happening with the Via. Anyone else experiencing this on their 1490LMT? Please comment...

MORE STUFF:

These two units will get you to your destination one way or another. I drove with these 2 units around my neighborhood and found that both make "mistakes". Mistakes, meaning they will take me to longer routes or make unnecessary turns... From South San Francisco to San Francisco The Nuvi made me drive on El Camino Real, a long boulevard, (after purposely missing some turns) before making me hop on the freeway (I-280) at the end, while the Via kept directing me to hop on the freeway entrances along the way. From SF to SSF I'm driving down 10th street towards the I-280 freeway entrance when all of a sudden the Via told me to make a left, then a right, another right and finally another left to get back on 10th street! WTF?! Bottom line, they will both make navigation mistakes but they will both get you where you're supposed to go.

The traffic routing is hit or miss. If the accident or the delay is not reported then there's no way for you to find out or avoid it in time. There was only one time in which the Nuvi gave me better traffic routing than the Via. Most of the time, both of the units, gave me the same routing. I also found that both units also report delays inaccurately... for example, both units will say a 2 minute delay (afternoon traffic) along my route but it really is more like a 10-15 minute delay!

Both units monitor how fast you're going compared to the speed limit. The Nuvi's display will turn red if you surpass the speed limit even by 1mph, the Via will only turn red if you go 5mph faster.

The Nuvi always shows an earlier estimated time of arrival compared to the Via. There's usually a 10-minute gap between the two units. For example, the Nuvi will estimate a time of arrival of 2:30, the Via at 2:40 but you actually get there by 2:35 The Nuvi seems to base its estimate as if as though you will not encounter traffic delays and the opposite can be said about the Via.

The Nuvi shows a very accurate picture of the junction views it will actually show you all the signs like how you would see them on the actual freeway. It grays out the signs that you are not suppose to take. The Via only shows the sign that you are suppose to take, it's as if it is the only sign on the freeway. I wonder if this might confuse some drivers. They both do a great job at illustrating which lanes to take. The Via shows the junction views longer than the Nuvi. The Nuvi shows the picture for about 7-9 seconds while the Via shows it close to 15 seconds.

Updating the maps on these units are very straightforward but the process is much quicker on the Nuvi that that of the Via. The Via took hours to complete! Close to 3 hours if I'm not mistaken. Updating gadgets should not have to take that long...

Both units paired with my iPhone 3GS without a hitch. Both units automatically pair up with my iPhone and downloads my contact info upon boot up. Receiving a call is easy with both units but found that the Nuvi is easier at making calls. You have to use the Via's troublesome Voice Command feature to make calls while the Nuvi uses the iPhone's Voice Control feature that is so much easier to use. I find the bluetooth functionality very convenient as it makes making and receiving calls that much easier while driving.

It took me almost a month to decide which one to keep... and in the end I chose the Garmin Nuvi. I went with the Garmin because of its LCD display and it's GUI (Graphic User Interface) it's simple, easy to read, understand and use. It puts me at ease that my wife can use it without asking me how to use it! I like the fact that the display stays sharp and vivid under the sun. I like how it gives the full addresses on POIs and how easier it is at making phone calls. As much as I like the Via's Voice Command feature and its included traffic/speed POIs, I can't overlook the fact that the Nuvi is a much "polished" product. I really don't care that the Via's MyTomTom online support is non-existent at the moment (it's still in beta) as long as they can provide me with updated maps, which they can. Although, it made me smile when I could download my little kids favorites Spongebob and Dora, as Voices and car characters from the Nuvi's online support page.

I really really like all the info that the Via shows on the screen but I find myself looking at it too much instead of the road! I like computers, so I like data and info as much as the next nerd but my wife had to tell me to keep my eyes on the road a couple of times while on a long drive... the Via became somewhat of a distraction. I really miss the Via's Voice Command... it is soooo cool! It doesn't work sometimes but when it does, I feel like Captain Kirk! A couple of updates on the voice command feature and it'll probably work much better! If I were given a few more days with the Via, I would have probably picked it over the Nuvi... I don't know, it's just a super cool device for the same price!!

I'm a family man with wife and kids. So in the end, I chose a unit that I feel is very safe on the road that could easily aid us in getting where we need to go. The less distraction the better... '

Click Here For Most Helpful Customer Reviews >>

Sony DSC-WX300/B DSC-WX300 WX300 WX300B WX300/B DSCWX300B 18 MP

Sony DSC-WX300/B DSC-WX300 WX300 WX300B WX300/B DSCWX300B 18 MP Digital Camera with 20x Optical Image Stabilized Zoom and 3-Inch LCD 32GB Bundle with 32GB SDHC Card, Spare Battery, Rapid External Charger, Case, SD Card Reader + More
Customer Ratings: 4.5 stars
Buy Now
One star not because of a camera problem, but because of a customer service problem.

This is a "Beach Camera, Fulfilled by Amazon" item. That means the Amazon warehouse stores merchandise provided by Beach and, when an Amazon customer wants one, ships it from the Amazon warehouse. In the case of a camera bundle, Beach packs and seals a box containing the camera and the various bundle items. You can also order the identical bundle from Beach in NJ, for the same price, including free shipping. My Amazon warehouse is one state away, so UPS delivered the package the day after It was shipped. Amazon does a great job and their fulfillment service adds value for businesses, expanding their market and adding to Amazon's volume.

But Beach forgot to include the spare battery in the box I received. And that little fault exposed a big flaw in the fulfillment service. I contacted Amazon and was informed I could return the entire camera bundle, but they would not send the missing battery. I called Beach and was told I had to deal with Amazon because they had shipped me the incomplete package. The very friendly Beach customer service rep seemed not to know that Beach, not Amazon, had left the battery out of the bundle package. Both answers were not helpful. I had opened the camera and tried it out as soon as I got it. It is now a used camera and someone would lose money if I returned it to Amazon, and I would lose the return shipping cost. Beach sells this generic replacement battery for $15. I bought one at an Internet auction site for $4.33 including shipping, which is less than what it would cost to return the bundle to Amazon.

So now I know that I should have bought this bundle direct from Beach. The battery might still have been missing, but they would have replaced it without any buck passing and finger pointing.

Pros:

The camera is quite nice.

The 32 GB SDHC card is genuine Sony and works.

The battery charger is OK.

The card reader is OK

The tripod is OK

The lens cleaning kit is OK

Cons:

The spare battery was not in the box.

The "Digital universal case" is big enough to hold four of these cameras. I will buy a better-fitting case.

Amazon does not correct missing item issues on fulfillment sales by sending replacement items.

Click Here For Most Helpful Customer Reviews >>

Nikon COOLPIX S9200 16 MP CMOS Digital Camera with 18x Zoom

Nikon COOLPIX S9200 16 MP CMOS Digital Camera with 18x Zoom NIKKOR ED Glass Lens and Full HD 1080p Video
Customer Ratings: 4 stars
List Price: $299.95
Sale Price: $199.00
Today's Bonus: 34% Off
Buy Now

I'm sure I either have a bad copy...or some of the reviewing users here haven't put it through it's paces.

My problems:

1. S9300 will not lock focus when zoomed at or near it's maximum.

2. Selecting one of the Auto ISO ranges...125-800 ISO causes the camera to select very low shutter speeds, so that even with vibration reduction, if you are shooting people, the imgages are soft...appearing OOF...out of focus. (Unacceptable for this price range.)

3. The facial recognition feature, if used on anything but faces...will most often select something other than what you want to focus on...and since this is a menu driven feature, if you're switching between sceens, like at a birthday party, it's a pain to use.

4. Generally speaking, the images leave a lot to be desired across the board. And, this is the general consensus of online reviews...rating the camera a "C" as very average. I have to agree.

5. Portrait mode is way too cool...and there is no way to adjust the color temp in any mode except Auto. Or from the menu when in Auto...again, for the price, this is unacceptable.

6. And this is a biggie...I have lost confidence in the camera's ability to capture the shots that I want.

I tried to like it...I shot over 200 images...and very few were keepers. I had a Canon Elf S600...and it took better images than this model...and the Canon S600 is 4 years old.

I have called Nikon and asked for an RMA and am returning S9300 for a refund. Bottom line, for $349.00, this camera is a poor to average performer...yeilding good to mediocre images.

I don't disagree that if you are outside in bright light that it takes pretty good images...but, still not up to my expectations for the price tag.

I cannot in good conscience recommend this camera to friends or anyone else.

Like I said in my opening statement...I may have a bad copy. These are just my findings on the copy that I received...

Not a happy camper here...

UPDATE: Going on vacation soon and wanted a better point and shoot. Purchased the Nikon P7700 compact point and shoot. I am thrilled to say that this is more like what I was looking for when I bought the S9300. There are lots of external controls...more is better...such as a thumb wheel to adjust your exposure on the fly...way cool.

Image quality is first rate at this price point($399.00.) It is bigger than the S9300 and doesn't have the zoom range...but it does zoom optically to the equivalent of 200mm. Nice.

Just check out the P7700 here at Amazon...you won't be sorry.

I see Nikon has yanked the S9300 and replaced it with an S9500...so, reviews weren't wrong...to bad for current S9300 owners. I wonder if Nikon will be offering a discount on the new S9500, if you send in your S9300.

Click Here For Most Helpful Customer Reviews >>

Sony DSC-HX50V/B DSC-HX50, HX50, DSCHX50 20.4MP Digital Camera

Sony DSC-HX50V/B DSC-HX50, HX50, DSCHX50 20.4MP Digital Camera with 3-Inch LCD Screen Bundle with 32GB Class 10 High Speed SD Card, Spare Battery, External Battery Charger, Micro HDMI Cable, SD Card Reader, Table top Tripod, Camera Case + More
Customer Ratings: 5 stars
Buy Now
Sony has surprisingly taken over as a ratings leader in digital cameras. This camera is a little bigger and heavier than the pocket cameras I have had in the past, but it has a 30x zoom that makes up for it. A friend of mine bought this camera a year ago for over $800. My camera was $400 less than that. It takes beautiful pictures, as expected. I have only begun to use all the features. Settings can be manually adjusted.

Click Here For Most Helpful Customer Reviews >>