After doing a lot of research on Amazon I took a chance to add this camera to my existing home CCTV system. I use 4 logitech 9000 USB cameras. Two to monitor outside, and two to monitor the second floor of my home. I wanted to monitor the first floor, thereby completing my CCTV project. I travel a lot and like to keep an eye on my home from afar. I run everything on an iMac, running "Security Spy". Security Spy supports this camera. My goal was to connect it to my wireless network, and view the camera via Security Spy, and the camera's built in webserver, if the iMac went down while I was traveling (which has happened in the past).
At first I had problems but with a bit of patience I figured it out. The first thing I had to do was to give the camera a static ip address as my airport extreme would want to change the camera's IP address everytime it rebooted, which caused me a hour of grief. Once the camera had a fixed IP my airport extreme router settled down and "accepted" the camera.
The second thing I had to do was to "disable" the Plug N Play feature in the setup menu of the camera. That caused me another hour of wasted time, as the UPnP feature caused havoc with the stability of my wireless network and prevented me from seeing the camera via the internet. Once the UPnP was disabled in the camera my wireless network was rock solid. I was able to view the camera via the web, as well as on my iphone. The camera has proven to be a great addition. The picture quality is great. It is very well made. To me, it was money well spent.
I only wish the documentation was written better, as I really felt like I was flying by the seat of my pants. So detailed below is a brief overview to help other Mac users as the setup was not in the instructions, nor are they obvious.
For Mac users that have an Airport Extreme router, it helps to setup "Port Mapping" to ensure you can see the camera on the web. Go into "Utilities" in the Applications Menu, then select Airport Utility and wait for the application to open.
Once you see your Airport Extreme in the viewing pane, select "Advanced" followed by "Port Mapping". Then hit the "+" and select "Personal Web Sharing" from the drop down menu. Type in the forwarding port you want to use. Example port "80". Enter this value in the Public TCP Port field, and then enter it in the "Private TCP Port" field.
Then in the Private IP address field enter the camera's IP address. Finally give the Port Mapping configuration and name....eg. "KITCHEN_CAMERA". Hit continue and wait for the airport extreme to reboot. Once this is done the router is configured.
Power up the camera close to the router (making sure it is in range) and the blinking light on the camera should go green, indicating you have a connection established. Don't forget to turn off the UPnP in the SETUP menu of the camera as I mentioned earlier. If the camera does not work, don't worry. You are 95% complete. Just back track your steps as you may have missed something. Good luck to all.
Enjoy the camera it is a great little device. I hope this review and my mac configuration helps others.
0 comments:
Post a Comment